Ajax Hood for MotionProtect Outdoor

Two PIR sensors, wireless, detection range up to 15 m, communication range up to 1200 m, immunity to animals up to 80 cm tall (weight does not matter), 3V power supply from 2 CR123A batteries, it is possible to connect 12 V power supply ± 20%. White colour.

Holder for fixing alarm Button or DoubleButton buttons on surfaces. Material: plastic, operating temperature range: -10 ° C to + 40 ° C, dimensions: 47.1x37.9x14.2 mm, weight: 3.5 g. Color: black.

The bracket for sensors is universal for installing, fixing, holding and fixing the sensors of the security alarm system. Allows you to arbitrarily change the angle of inclination of the sensors. The head of the bracket has the ability to change the position in a circular way at an angle of up to 115 degrees relative to the axis of the perpendicular plane. Through hole for cable entry directly into the sensor.

The bracket for sensors is universal for installing, fixing, holding and fixing the sensors of the security alarm system. Allows you to arbitrarily change the angle of inclination of the sensors. The head of the bracket has the ability to change the position in a circular way at an angle of up to 30 degrees relative to the axis of the perpendicular plane. Installation of a bracket with fixing the head with two screws.

Remote GSM antenna Tiras for GSM dialer 3x5, SMA connector, provides reception of the GSM network signal in places where the signal is weakened.

The digital GSM auto-dialer module Tiras MCA-GSM transmits notifications via the data transmission channel (CSD/GPRS) of GSM 900/1800 mobile operators to the monitoring station in the Contact-ID protocol.

The bracket for sensors is universal for installing, fixing, holding and fixing the sensors of the security alarm system. It allows you to easily and quickly install the Optex detector in the desired location on the wall and turn it at the correct angle (horizontal ±45°, vertical 0-20°). Compatibility: Optex sensors of the CX-702, LX-402, LX-802 N series. Material: ABS plastic. Dimensions: 128x70mm.

Bracket for sensors modernized (on the wall, ceiling), with screw fixation. Designed for mounting sensors and burglar alarm detectors (motion sensors, acoustic glass break detectors, etc.) on structural elements of buildings and structures. Allows you to arbitrarily change the angle of inclination of the sensors.

Adapter for connecting wireless communication devices (GPRS, CDMA, 3G, Wi-Fi, Bluetooth) using a coaxial cable with an external signal amplification antenna. Connectors: SMA-jack 6.2 mm (Female) / U.FL 3 mm (IPEX). Operating frequency: up to 3 GHz, nominal voltage: 60 V, impedance: 50 Ohm, length: 150 mm, calculated number of disconnections: 30.

Swivel bracket for Satel sensors. Installation type: wall / ceiling. Material: ABS plastic.

LED for control of PPK for transmitting a signal about the state of fire and security alarm systems, designed for continuous round-the-clock operation. Remote, mortise type, 3 mm sealed with 150 mm wire (confirmation LED). Diode color: red. Fitting diameter: 10 mm. Overall dimensions: Ø10xL26 mm. Switching current: 1.5 ... 3 V.

Touch screen 7" IPS, Tuya Smart support, microSD slot, internal memory 128 MB, photo/video recording, Hands Free, 4 channels (2 Full HD AHD/HDTVI/HDCVI/CVBS calling panels and 2 Full HD AHD/HDTVI/HDCVI/CVBS video cameras), photo/video recording on motion detection, ability to connect 2 alarm sensors and an additional monitor with low frequency output, intercom, AC 100-240 V. Color: white.

1/2.8" progressive scan CMOS; Lens: f = 5-75 mm (viewing angle 53.8°- 4.0°); Record: 50Hz: 25 fps - (1920×1080), 60Hz: 30 fps - (1920×1080); Functions: AGC / 3D DNR / BLC / HLC / WDR; IR illumination up to 100 m; DC 12 V.