GSM antenna Atis GSM antenna SMA 5 m

Bracket for DS-PD2-D/P series sensors for ceiling installing and fixing sensors in the security alarm system. With it, you can easily and quickly install the detector in the desired location. Material: ABS plastic. Size: 41 x 46 x 32 mm.

Bracelet for portable wireless push-button DS-PDEBP1-EG2-WE. Material: skin-friendly rubber. White colour.

Bracket for DS-PD2-D/P series sensors for wall installing and fixing sensors in the security alarm system. With it, you can easily and quickly install the detector in the desired location. Material: ABS plastic. White colour.

The digital GSM auto-dialer module Tiras MCA-GSM transmits notifications via the data transmission channel (CSD/GPRS) of GSM 900/1800 mobile operators to the monitoring station in the Contact-ID protocol.

The bracket for sensors is universal for installing, fixing, holding and fixing the sensors of the security alarm system. It allows you to easily and quickly install the Optex detector in the desired location on the wall and turn it at the correct angle (horizontal ±45°, vertical 0-20°). Compatibility: Optex sensors of the CX-702, LX-402, LX-802 N series. Material: ABS plastic. Dimensions: 128x70mm.

Bracket for sensors modernized (on the wall, ceiling), with screw fixation. Designed for mounting sensors and burglar alarm detectors (motion sensors, acoustic glass break detectors, etc.) on structural elements of buildings and structures. Allows you to arbitrarily change the angle of inclination of the sensors.

Adapter for connecting wireless communication devices (GPRS, CDMA, 3G, Wi-Fi, Bluetooth) using a coaxial cable with an external signal amplification antenna. Connectors: SMA-jack 6.2 mm (Female) / U.FL 3 mm (IPEX). Operating frequency: up to 3 GHz, nominal voltage: 60 V, impedance: 50 Ohm, length: 150 mm, calculated number of disconnections: 30.

Swivel bracket for Satel sensors. Installation type: wall / ceiling. Material: ABS plastic.

LED for control of PPK for transmitting a signal about the state of fire and security alarm systems, designed for continuous round-the-clock operation. Remote, mortise type, 3 mm sealed with 150 mm wire (confirmation LED). Diode color: red. Fitting diameter: 10 mm. Overall dimensions: Ø10xL26 mm. Switching current: 1.5 ... 3 V.

Ajax Hood for MotionProtect Outdoor protects sensors of the anti-masking system from rain and snow. Material: polycarbonate. White color.

Retaining force 1000 kg, installation type - mortise, for wooden, metal and metal-plastic doors. Normally open (NO), closed by power supply 12 V. Built-in delay time delay of the door closing: 0/3/6/9 sec. Suitable for indoor (indoors) installation. Includes back strap with reed.

Wi-Fi, GSM, Ethernet, 2 SIM cards (micro SIM 2G, 3G, LTE), range of up to 2000 meters on the Jeweller radio protocol, 868.0-868.6 MHz, 200 wireless zones, 25 groups, 100 cameras and DVRs. Power supply 110-240 V from the network, backup battery Li-Ion 3 AC. White color.

Passive IR sensor, wireless, photo registration of events, detection range up to 12 m, communication range up to 1700 m, immunity to animals up to 20 kg and height up to 50 cm, 3V power supply from 2 CR123A batteries. White colour.

1/3" progressive Scan CMOS; Compression: H.264 / H.265; Lens: f = 3.6 mm (viewing angle 76°); Record: 1-20 fps; IR illumination up to 30 m. Memory slot: microSD up to 256GB; Power supply DC 12 V.

1/2.7" Progressive CMOS; H.264/ H.265; Lens: f = 2.8 mm (viewing angle 114.7°); Record: 25 fps;  Built-in microphone and speaker; IR illumination up to 30 m. Memory slot: micro SD up to 128GB; Power supply DC 12 V.

1/2.8" Progressive CMOS; Compression: H.264/H.265; Lens: f = 2.8 mm (viewing angle 102°); Record: 1920x1080 - 1 - 25 fps; Built-in microphone; IR illumination up to 30 m, LED illumination up to 15 m. Memory slot: micro SD up to 256 Gb; protection class IP67; DC 12 V.