Hikvision DS-PDB-IN-Wristband Bracelet for Portable Wireless Emergency Button DS-PDEBP1-EG2-WE AX PRO

The bracket for sensors is universal for installing, fixing, holding and fixing the sensors of the security alarm system. Allows you to arbitrarily change the angle of inclination of the sensors. The head of the bracket has the ability to change the position in a circular way at an angle of up to 115 degrees relative to the axis of the perpendicular plane. Through hole for cable entry directly into the sensor.

The bracket for sensors is universal for installing, fixing, holding and fixing the sensors of the security alarm system. Allows you to arbitrarily change the angle of inclination of the sensors. The head of the bracket has the ability to change the position in a circular way at an angle of up to 30 degrees relative to the axis of the perpendicular plane. Installation of a bracket with fixing the head with two screws.

Remote GSM antenna Tiras for GSM dialer 3x5, SMA connector, provides reception of the GSM network signal in places where the signal is weakened.

The digital GSM auto-dialer module Tiras MCA-GSM transmits notifications via the data transmission channel (CSD/GPRS) of GSM 900/1800 mobile operators to the monitoring station in the Contact-ID protocol.

The bracket for sensors is universal for installing, fixing, holding and fixing the sensors of the security alarm system. It allows you to easily and quickly install the Optex detector in the desired location on the wall and turn it at the correct angle (horizontal ±45°, vertical 0-20°). Compatibility: Optex sensors of the CX-702, LX-402, LX-802 N series. Material: ABS plastic. Dimensions: 128x70mm.

Bracket for sensors modernized (on the wall, ceiling), with screw fixation. Designed for mounting sensors and burglar alarm detectors (motion sensors, acoustic glass break detectors, etc.) on structural elements of buildings and structures. Allows you to arbitrarily change the angle of inclination of the sensors.

Adapter for connecting wireless communication devices (GPRS, CDMA, 3G, Wi-Fi, Bluetooth) using a coaxial cable with an external signal amplification antenna. Connectors: SMA-jack 6.2 mm (Female) / U.FL 3 mm (IPEX). Operating frequency: up to 3 GHz, nominal voltage: 60 V, impedance: 50 Ohm, length: 150 mm, calculated number of disconnections: 30.

Swivel bracket for Satel sensors. Installation type: wall / ceiling. Material: ABS plastic.

LED for control of PPK for transmitting a signal about the state of fire and security alarm systems, designed for continuous round-the-clock operation. Remote, mortise type, 3 mm sealed with 150 mm wire (confirmation LED). Diode color: red. Fitting diameter: 10 mm. Overall dimensions: Ø10xL26 mm. Switching current: 1.5 ... 3 V.

Ajax Hood for MotionProtect Outdoor protects sensors of the anti-masking system from rain and snow. Material: polycarbonate. White color.

1/2.7" progressive Scan CMOS; Compression: H.264 / H.265; Lens: f = 2.8 mm (viewing angle 113°); Record: 1-25 fps; IR illumination up to 30 m. Memory slot: microSD up to 256GB; Power supply DC 12 V.

6 TB, hard drive for video surveillance systems. Рurple series, HDD SATA III, drive capacity: 6 TB, 3.5" HDD SATA III, 128 Mb buffer, dimensions 147x101.85x26.11 mm, weight 720 g.

8 TB hard drive 3.5" HDD SATA III, 256 Mb, 7200 rpm, 245 Мb/s, 8.6 W, purple, 147x101.6x26.1 mm

4 TB hard drive 3.5" HDD SATA III, 64 Mb, 5400 rpm, 150 Мb/s, 5.1 W, purple, 147x101.6x26.1 mm

4 TB, hard drive for video surveillance systems. Skyhawk series, HDD SATA III, drive capacity: 4 TB, 3.5" HDD SATA III, 64 Mb buffer, dimensions 147x101.85x26.11 mm, weight 610 g.

Screen 10" TFT, microSD slot, Hands Free, Ethernet, Wi-Fi, channels (IP calling panels and IP video cameras in any ratio), ability to connect 6 wired and 8 wireless alarm detectors, do not disturb mode, touch screen, touch buttons, intercom, port RS-485, DC 12 V, PoE. Color: white.