The BNC-P connector is used to connect a coaxial cable of the type RG-6 (or another 6 mm diameter) to a camera or a DVR, requiring no additional installation tools.
The BNC-P connector is used in video surveillance to connect a coaxial cable of the type RG-6 (or another 6 mm diameter) to a camera or a DVR, requiring no additional installation tools.
The cable is attached to the back of the BNC connector and secured with a plastic cap.
BNC-connector is put on the corresponding connector of the video camera or DVR.
Buyers reviews:Add feedback
Сable to connect video surveillance devices with an HDMI interface. Cable length 1.5 m. Cable color: gray.
Adapter plug BNC-F (Quality A) is used in video surveillance to connect a coaxial cable to a camera or a DVR.
RJ-45 connector with 8-pin terminal block for video surveillance systems.
The connector is for connecting cables to video and audio equipment and other devices.
The BNC-Comp-B connector is used to connect a coaxial cable of the type RG-6 (or another 6 mm diameter) to a camera or a DVR. Compression.
BNC-BNC-5 cable for connecting two coaxial cables that are intended for signal transmission in CCTV, length 50 centimeters. Cable color: black.
Adapter for connecting two coaxial cables that are intended for signal transmission in CCTV.
The Atis L4 power splitter is used in video surveillance systems to transfer power from 1 power source to 4 devices.
The connector-power on the clip is used in video surveillance to connect two live cables (twisted pair, signal) and to supply power to the camera.
1/3" Progressive Scan CMOS; Compression: H.264 / H.264+/ MJPEG; Lens: f = 2.8-12 mm (viewing angle 112°-33.8°); Record: Main Stream 4 МР - 20 fps, 3 МР/1080р/720р - 25 fps, Sub Stream VGA/CIF - 25 fps; Functions: day/night (ICR) / AGC / 3D-DNR / BLC / WDR / ROI; IR illumination up to 30 m; storage method: NAS (support for NFS, SMB / CIFS); ANR, microSD / SDHC / SDXC up to 128GB; Power supply DC 12 V / PoE.
Router is aimed at home use. Supports both hardware and software connection via WPS, so as not to enter a complex password, for wireless Internet access, as well as to switch to cAP mode and connect to the CAPsMAN core network at the touch of a button. RouterOS L4.
Number of channels: 4, standart IP, 6 MP, recording: 6 MP, 5 MP, 4 MP, 3 MP, 1080p, 720p, D1 - 25 fps, H.264+, H.265+, incoming bandwidth: 40 Mbps, 1 stream; IP cameras: 4; audio inputs/audio output; alarm inputs-outputs: no; HDD: 1 SATA III, up to 4 Tb; RAID: no; compatibility: ONVIF 2.4, SDK, CGI Conformant; port PoE: 4; Wi-Fi: no; Connector: HDMI - 1; VGA - 1; RS-485 - no; USB port - 2xUSB 2.0; operating voltage: DC 48 V / 3.6 W (without HDD); body material: metal; body color: black; dimensions: 197x196.6x41.5 mm
Keyhole sensor for burglar alarm systems. Triggered when trying to break, drilling, learning the type of lock. Integrates into any security system. It has a built-in resistance from 0 to 10 kOhm, which makes it compatible with almost any alarm system. Does not require power, connects to standard wired door sensors. Color white.