Network filter Utepo USP201EP

The Utepo USP201POE-A surge protector is based on the IEC61643-21: 2000 standard. Designed to protect the mains signal and power supply overvoltage. It has multilevel protection, large maximum discharge current, low limit voltage, fast response.

Protection device against induced impulse voltages (lightning protection) in the RS-485 line.

3-in-1 protection for robotic cameras (power, interface, video signal) against high-voltage surge voltages in the line caused by electrostatic charges, lightning discharges, strong electromagnetic fields, high-voltage impulses. The device requires a mandatory signal ground for correct operation.

Protection of computer networks from high-voltage impulse overvoltages in the line caused by electrostatic charges, lightning discharges, strong electromagnetic fields, high-voltage impulse pickups. The device requires a mandatory signal ground for correct operation.

Protection of the control of robotic cameras from high-voltage surge voltages in the line caused by electrostatic charges, lightning discharges, strong electromagnetic fields, high-voltage pulse pickups. The device requires a mandatory signal ground for correct operation.

Protection of video surveillance devices via video signal lines (coaxial cable) from high-voltage surges in the line caused by electrostatic charges, lightning discharges, strong electromagnetic fields, high-voltage impulse pickups. The logical operation of the device requires a mandatory signal ground.

Protection device against induced impulse voltages (lightning protection) in the RS-485 line.

A device for protection against induced impulse voltages (lightning protection) is used with a coaxial cable to protect video equipment from high-voltage surge voltages in the line.

Dual protection device for video surveillance devices on video signal lines (coaxial cable) and power supply 12V DC 1 A against surge voltages.

Dual protection device for video equipment against high-voltage impulse overvoltage in the video signal and control lines.

Retaining force 1000 kg, installation type - mortise, for wooden, metal and metal-plastic doors. Normally open (NO), closed by power supply 12 V. Built-in delay time delay of the door closing: 0/3/6/9 sec. Suitable for indoor (indoors) installation. Includes back strap with reed.

Wi-Fi, GSM, Ethernet, 2 SIM cards (micro SIM 2G, 3G, LTE), range of up to 2000 meters on the Jeweller radio protocol, 868.0-868.6 MHz, 200 wireless zones, 25 groups, 100 cameras and DVRs. Power supply 110-240 V from the network, backup battery Li-Ion 3 AC. White color.

Passive IR sensor, wireless, photo registration of events, detection range up to 12 m, communication range up to 1700 m, immunity to animals up to 20 kg and height up to 50 cm, 3V power supply from 2 CR123A batteries. White colour.

1/3" progressive Scan CMOS; Compression: H.264 / H.265; Lens: f = 3.6 mm (viewing angle 76°); Record: 1-20 fps; IR illumination up to 30 m. Memory slot: microSD up to 256GB; Power supply DC 12 V.

1/2.7" Progressive CMOS; H.264/ H.265; Lens: f = 2.8 mm (viewing angle 114.7°); Record: 25 fps;  Built-in microphone and speaker; IR illumination up to 30 m. Memory slot: micro SD up to 128GB; Power supply DC 12 V.

1/2.8" Progressive CMOS; Compression: H.264/H.265; Lens: f = 2.8 mm (viewing angle 102°); Record: 1920x1080 - 1 - 25 fps; Built-in microphone; IR illumination up to 30 m, LED illumination up to 15 m. Memory slot: micro SD up to 256 Gb; protection class IP67; DC 12 V.

Fingerprint scanner with Mifare RFID card reader, HID (optional). Fingerprint scanner - optical. Interfaces: Ethernet, RS232 / RS485, USB client, RS485, Wiegand-26 input and output. Fingerprint template memory: 1500, RFID memory for contactless cards (optional): 10000, event template memory: 100000. Рower supply DC 12 V.