The uninterruptible power supply kit consists of a Full Energy BBGP-125 pulse power supply unit, which converts 220V AC mains voltage into 12V DC voltage, output current 5 A, and a Full Energy FEP-127 battery, which is a source of direct current, which is designed to accumulate, store energy and transfer it in the event of a power outage from the network. Designed for organization of uninterrupted power supply in video surveillance systems, access control and other systems.
Assembly
The Full Energy BBGP-125+FEP-127 set includes:
- uninterruptible power supply unit Full Energy BBGP-125 – 1 pc.
- Full Energy FEP-127 battery – 1 pc.
Features of Full Energy BBGP-125
- type: pulse;
- input: ~ 100 – 240 V, terminal;
- output: +12 – 14 V / 5 A, terminal;
- 1 load channel;
- maximum charge current 0.8 A;
- overload protection;
- short circuit protection;
- protection against voltage drops;
- deep discharge protection;
- independent recovery;
- regulation of the output voltage;
- plastic case;
- dimensions: 210 x 155 x 90 mm.
Features Full Energy FEP-127
- battery capacity: 7.2 Ah;
- battery type: lead-acid;
- technology: AGM
- nominal voltage: 12 V;
- body type: durable ABS plastic;
- dimensions: 150 x 65 x 95 mm;
- weight: 2 kg.
Purpose of Full Energy BBGP-125 + FEP-127
It is used for backup power supply of equipment in video surveillance systems, ACS, network equipment and other types of equipment of the appropriate voltage (12 V).
How many hours will the battery last?
It all depends on the consumption power. For example, if the connected devices consume up to 1 A, then you will have enough uninterrupted power for about 4-5 hours. If you have a total consumption of 2 A, then for 2-2.5 hours, respectively.
Price of Full Energy BBGP-125+ FEP-127
When buying this product in the Bezpeka Club marketplace, you can always be sure of the best price, as we regularly monitor market prices for all security system products. The price of the product includes pre-sale consultation, technical support, official warranty.
Installation
Connect the device in the following sequence:
- make sure that mains voltage is not applied to the power source;
- open the front cover;
- install the rechargeable battery * and connect it to the special terminals, observing the polarity (“+” red terminal, “-” black terminal);
- connect the load to the “± 12 V” terminals;
- connect the wires of the “220V” power supply to the corresponding terminals;
- close the lid;
- supply 220 V power to the device.
* A sealed, maintenance-free 12V battery must be used. When choosing and before installing a battery, you must read the battery manufacturer’s instructions.
WARNING! Some parts of the power supply are under high voltage. Therefore, in order to avoid electric shock, when carrying out installation work, the voltage of the industrial network must be disconnected from the unit.